| Course Expiration: |
May 30, 2024 |
| Course Type: |
Electrician |
| Core Credit Hours: |
8.0 |
| HVAC Specific: |
No |
| Energy Specific: |
No |
| NFPA-70E Specific: |
Yes |
| Course Name: | 2021 NFPA 70E / Arc Flash Electrical Safety 8hr |
|---|
| Course Outline & Objectives: | This course combines the discussion of content and application of material in an in-class interactive format. It provides a hands-on experience where attendees perform the same safety skills they must demonstrate in the field. This is what NTT Electrical Safety Training is all about.
The NFPA 70EŽ Standard for Electrical Safety in the Workplace provides the prescriptive methods for OSHA compliance for electrical safe work. NTT Training provides the hands-on instructor demonstration and student practice for implementing the standard. Tabletop and hands-on exercises will have students work with their own copy of NFPA 70E; helping to ensure they understand these requirements.
With the publication of the 2021 edition of this electrical safety standard, NFPA 70E continues to emphasize a risk assessment approach to electrical safety.
For the NTT student, this means:
? learning to identify the hazards of
an electrical job,
? assessing what can be done to
eliminate hazards,
? understanding methods of
mitigating hazards,
? how to use best industry practices
to comply with requirements,
? and achieve a safe-as-practical
approach to performing electrical
work. |
|---|
| Course Schedule |
03/31/2022-03/31/2023
Salt Lake Refinery
685 S. Chevron Way
North Salt Lake, UT 84054 |
| Calendar Events |
| Keywords: |
NFPA 70EElectrical Safety 2021 8hr |
| Location(s): |
Utah
|
| Teaching Method: | Live |
|---|
| Company Name: | National Technology Transfer, Inc |
|---|
| Phone: | 303-957-4312 |
|---|
| Address: | 6675 S Kenton St., Ste 100 |
|---|
| City: | Centennial |
|---|
| State: | CO |
|---|
| Postal Code: | 80111 |
|---|
| Email Address: | amyatt@nttinc.com |
|---|
| The Course Provider is: | a commercial continuing education provider related to the construction trades |
|---|
| Signup Link: | https://www.nttinc.com/course/electrical-safety-training-arc-flash-nfpa-70e-2018-edition/ |
|---|
| Instructor First Name: | Redwood |
|---|
| Instructor Last Name: | Kardon |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached. |
|---|
| Instructor Resume: |
36668_Redwood_Kardon_47819_201710051231_Resume (002).pdf |
| Instructor First Name: | Orson |
|---|
| Instructor Last Name: | Christiansen |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | ORSON CHRISTIANSEN Professional Experience: Quality Assurance Test Engineer, Hercules Inc.; Electrical Engineer, Facilities, Hercules Inc.; Senior Facilities Engineer, Electrical, Hercules Inc.; Instructor, Technology Dept., University of Utah;District Manager, Bussmann Fuse Co.;Senior Sales Engineer, Cooper Bussmann Inc.; Member, Executive Committee, Northwestern Section;International Association of Electrical Inspectors Instructor, Electrician Licensing Renewal, “Overcurrent Protection and the National Electrical Code”, states of Idaho, Montana and Utah National Technology Transfer – Instructor since 2005 Education and Training: BSEE, University of Utah, Salt Lake City, UT 1961 Licensed Professional Engr, Electrical, UT -Certified Instructor, Electrician CEU Courses, Code-Related, State Of Montana -Certified Instructor, Electrician CEU Courses, Industry-Related, State of Idaho -Certified Instructor, Electrician CEU Courses, Code-Related, State of Utah |
|---|
| Instructor Resume: |
O. Christiansen resume.doc |
| Instructor First Name: | Martin |
|---|
| Instructor Last Name: | Wright |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached |
|---|
| Instructor Resume: |
Wright_Martin.pdf |
| Instructor First Name: | Bill |
|---|
| Instructor Last Name: | Gantic |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Gantic_Bio.pdf |
| Instructor First Name: | Bill |
|---|
| Instructor Last Name: | Clapp |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Clapp_Bill Bio.pdf |
| Instructor First Name: | Orson |
|---|
| Instructor Last Name: | Christiansen |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | ORSON CHRISTIANSEN Professional Experience: Quality Assurance Test Engineer, Hercules Inc.; Electrical Engineer, Facilities, Hercules Inc.; Senior Facilities Engineer, Electrical, Hercules Inc.; Instructor, Technology Dept., University of Utah;District Manager, Bussmann Fuse Co.;Senior Sales Engineer, Cooper Bussmann Inc.; Member, Executive Committee, Northwestern Section;International Association of Electrical Inspectors Instructor, Electrician Licensing Renewal, “Overcurrent Protection and the National Electrical Code”, states of Idaho, Montana and Utah National Technology Transfer – Instructor since 2005 Education and Training: BSEE, University of Utah, Salt Lake City, UT 1961 Licensed Professional Engr, Electrical, UT -Certified Instructor, Electrician CEU Courses, Code-Related, State Of Montana -Certified Instructor, Electrician CEU Courses, Industry-Related, State of Idaho -Certified Instructor, Electrician CEU Courses, Code-Related, State of Utah |
|---|
| Instructor Resume: |
O. Christiansen resume.doc |
| Instructor First Name: | Bill |
|---|
| Instructor Last Name: | Clapp |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Clapp_Bill Bio.pdf |
| Instructor First Name: | Bill |
|---|
| Instructor Last Name: | Gantic |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Gantic_Bio.pdf |
| Instructor First Name: | Redwood |
|---|
| Instructor Last Name: | Kardon |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached. |
|---|
| Instructor Resume: |
36668_Redwood_Kardon_47819_201710051231_Resume (002).pdf |
| Instructor First Name: | Martin |
|---|
| Instructor Last Name: | Wright |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached |
|---|
| Instructor Resume: |
Wright_Martin.pdf |
| Instructor First Name: | Alvaro |
|---|
| Instructor Last Name: | Ramiro |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | January 11, 2019NTT HRRemoteInstructor Job Opening.I offermore than 10years of industrial maintenanceexperience, andtwoyears of Industrial Technology Education, tenyears of Manufacturing and Technology Instructor, and two years as Global Technical Trainer.I possess extensive familiarityin electricalprojects,programing,industrial controls, OSHA30to include intrinsically attached to my experienceCFR Title 29 part 1910.147 and NFPA 70 continuously Training, Development and Implementing.I also possess extensive knowledge of general industry and project management. I have knowledge of motor drives, control systems, AutoCAD, and expert levelon mechanical, hydraulic, pneumatic, and electricalsystems. My experience and work history has help createdgood time management. Possess greatcustomer service skills. I am a dedicated team player and able to lead when necessary to meet the goals of the organizationI have attachedmy resume for your review, it will describe myskills and experience. And a capable individual, I will like the opportunity to contribute to your organization with my knowledge, team work abilities, and extensive understanding ofthe industrial field. If there are any questions on any regard or please don?t hesitate to call me at (361)726-1689. I welcome the opportunity to demonstratemy abilitiesand contribute to yourteam. Whether as a remote employee or a contractor.Sincerely,Alvaro Ramiro2400 Kilgore RdBaytown TX 77520 (+1 361 7261 689)alvaroramiro@yahoo.com
Alvaro Ramiro2400 Kilgore, Baytown TX 77520alvaroramiro@yahoo.com -(361) 726 1689To work with an organization that fully utilizes my life experience while promoting new challenges.WORK EXPERIENCEMaintenance TechnicianUTLX Manufacturing -Sheldon, TX -August 2016 to PresentBilingual Global Technical InstructorNational Oilwell Varco -Houston, TX -January 2014 to June 2015Teaching Electrical Controls, Electrical Maintenance and Mechanical courses to internal and external customers in the commissioning and maintenance of oil field equipment with tangibles results. On site and classroom, using power point presentations and experience. Development of customer specific classes and competencies, assisting sales and field service technicians while enhancing and adapting to market trends travel to customer sites in the Country and abroad working with different cultures and languagesElectro Mechanical TechnicianIndustrial Fabricators -November 2009 to December 2014Maintenance of production equipment, as Overhead cranes, VFD's DC/AC drives, CNC, Motor starters welders, press brakes, Hydraulics. Pneumatics and mechanical including all fabricating equipmentMaintenance ElectricianCITGO -March 2005 to August 2007Chemical plant, trouble shooting controls, lighting and substations, repair electrical equipment, or preventive maintenance, conduit and wire runs, pumps, compressors, Motor Starters,ACs /DC Drives, MOV, VFD, PLC, Switchgears, generators, instruments, plant safety procedures.General ContractorRamiro Consulting _ Corpus Christi TX August 1999 to Jan 2005
Building of new homes and remodeling, managed crews of up to 25 labor hands and subcontractors, Project manager bookkeeping and payroll training and supervising crews, Rewiring and service callsTechnical InstructorRichard J. Daley College/ Chicago Commons ?Assisted on development of a new program of manufacturing technology ?Trained students on Computer Drafting, math shop, Computer Numerical Controls in Classroom, lab, and on the field production facilities.?Field Training and skills development for employees and customers, competency based Training?Archive Training,records and documentation for all trainees and classes?Identify and arrange the learning resources/documents (such as training material, Operating manuals, Maintenance manuals, Training manuals, Technical Drawings Critical Competency Checklists, Task Based Assessment Lists, Operations & Maintenance procedures and Standing instructions etc.) that are required for the traineesTechnical InstructorChicago Commons -January 1989 to January 1995?Developed and presented multilevel classroom courses on Manufacturing Technology to full time students as well as employees and end users with varying levels of knowledge, skills, and abilities.?Assist in development of training materials, technical/troubleshooting manuals, and user guides.?Taught industrial controls programing and mechanical instrumentation.?Created course guides for specific business sector.?Prepared syllabus, daily classroom materials, and student references manuals for field on the job trainees, to continuously improve their skills.EDUCATIONIndustrial EngineeringTexas A & M KingsvilleELECTRICIAN (10+ years)CERTIFICATIONS/LICENSES
Top Drive, Draw-works, Amphion, Hydraulics, OH CranesIndustrial Controls, ABB, SIEMENS, ALLEN BRADLEY, TDLR Journeyman ElectricianADDITIONAL INFORMATIONOther Skills Bilingual Spanish/Englishand Microsoft Office Proficient |
|---|
| Instructor Resume: |
Alvaro Ramiro_Resume (1).pdf |
| Instructor First Name: | Bill |
|---|
| Instructor Last Name: | Anderson |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
BillAnderson.pdf |
| Instructor First Name: | Randy |
|---|
| Instructor Last Name: | Barnett |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached |
|---|
| Instructor Resume: |
Barnett_Randy.pdf |
| Instructor First Name: | Mike |
|---|
| Instructor Last Name: | Bonnell |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Bonnell_Michael Bio.pdf |
| Instructor First Name: | Jim |
|---|
| Instructor Last Name: | Bosshart |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
JimBosshart.pdf |
| Instructor First Name: | Orson |
|---|
| Instructor Last Name: | Christiansen |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | ORSON CHRISTIANSEN Professional Experience: Quality Assurance Test Engineer, Hercules Inc.; Electrical Engineer, Facilities, Hercules Inc.; Senior Facilities Engineer, Electrical, Hercules Inc.; Instructor, Technology Dept., University of Utah;District Manager, Bussmann Fuse Co.;Senior Sales Engineer, Cooper Bussmann Inc.; Member, Executive Committee, Northwestern Section;International Association of Electrical Inspectors Instructor, Electrician Licensing Renewal, “Overcurrent Protection and the National Electrical Code”, states of Idaho, Montana and Utah National Technology Transfer – Instructor since 2005 Education and Training: BSEE, University of Utah, Salt Lake City, UT 1961 Licensed Professional Engr, Electrical, UT -Certified Instructor, Electrician CEU Courses, Code-Related, State Of Montana -Certified Instructor, Electrician CEU Courses, Industry-Related, State of Idaho -Certified Instructor, Electrician CEU Courses, Code-Related, State of Utah |
|---|
| Instructor Resume: |
O. Christiansen resume.doc |
| Instructor First Name: | Larry |
|---|
| Instructor Last Name: | Covert |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
LarryCovert.pdf |
| Instructor First Name: | Charley |
|---|
| Instructor Last Name: | Dickinson |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached resume |
|---|
| Instructor Resume: |
Dickinson_Charley Bio.pdf |
| Instructor First Name: | Jim |
|---|
| Instructor Last Name: | Fleming |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Fleming_Jim Bio.pdf |
| Instructor First Name: | Bill |
|---|
| Instructor Last Name: | Gantic |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Gantic_Bio.pdf |
| Instructor First Name: | Daniel |
|---|
| Instructor Last Name: | Holmberg |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
DanielHolmberg.pdf |
| Instructor First Name: | Ron |
|---|
| Instructor Last Name: | Hughes |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Hughes_Ron.pdf |
| Instructor First Name: | Redwood |
|---|
| Instructor Last Name: | Kardon |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached. |
|---|
| Instructor Resume: |
36668_Redwood_Kardon_47819_201710051231_Resume (002).pdf |
| Instructor First Name: | Terry |
|---|
| Instructor Last Name: | Konell |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Konell_Terrance Bio.pdf |
| Instructor First Name: | Terry |
|---|
| Instructor Last Name: | Ledbetter |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Ledbetter_Terry Bio.pdf |
| Instructor First Name: | Gordon |
|---|
| Instructor Last Name: | Little |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | Gordon Little
14313 Knoll Park DR E
Bonney Lake WA, 98391
Electrical License: ME01 Littlg*976JG
4/29/1987-10/23/1990 Electrician Maintenance Installer
Work with engineered drawings to install electrical components, conduit systems, and wiring, in
accordance with NFPA70 National Electric Codes
10/24/1990-7/04/1997 Electrician Maintenance
Military Flight Center, Maintain Ground Support Equipment, 400hz Generators, light carts,
explosion proof cords.
Maintain and service conventional machine tools, and process equipment.
Electronics Maintenance Technician 03/13/1997-04/29/2017
Machine Tool Rebuild ? Work Exclusively with NFPA79 Electrical Standard for Industrial
Machines. Rebuild, upgrade, modify, and test and trouble shoot problems.
UL508A Panel Shop, Fabricated Industrial Control Panels for Machine Tools Also Any Control
Panel That Was Needed for Any Boeing Location. In accordance with the standards of UL508A.
NFPA70 National Electric Codes, Installed Electrical Systems, Conduit Runs and Wiring in
Accordance with The National Electric Codes.
Work with Electronics Maintenance Technician Apprentices to Teach NFPA79 Standards, Build
Industrial Control Panels and Apply the NFPA70 National Electric Code.
Technician Lead in Moonshine Shop, Fabricating Right Size Pieces of Equipment, Completing
All Wiring Needed in Accordance with All Applicable Codes.
Electronic Technician Precision Machine Tool Maintenance, Completed Electrical Work on
Precision Machine Tools. Install, service, maintain, upgrade, and modify machine tools. Testing
and Trouble Shooting.
Work with Management, Engineering, equipment manufacturers, vendors. |
|---|
| Instructor Resume: |
Gordon Little_Resume (1).pdf |
| Instructor First Name: | Mike |
|---|
| Instructor Last Name: | Miers |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
Mike Miers Resume.tif |
| Instructor First Name: | Vernon |
|---|
| Instructor Last Name: | Miller |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Miller_Vernon Bio.pdf |
| Instructor First Name: | Steve |
|---|
| Instructor Last Name: | Pfister |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | Please see attached resume |
|---|
| Instructor Resume: |
Pfister_Steve_ Resume_NTT Update.pdf |
| Instructor First Name: | Alan |
|---|
| Instructor Last Name: | Pike |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached |
|---|
| Instructor Resume: |
Pike_Alan Bio.pdf |
| Instructor First Name: | Alvaro |
|---|
| Instructor Last Name: | Ramiro |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | January 11, 2019NTT HRRemoteInstructor Job Opening.I offermore than 10years of industrial maintenanceexperience, andtwoyears of Industrial Technology Education, tenyears of Manufacturing and Technology Instructor, and two years as Global Technical Trainer.I possess extensive familiarityin electricalprojects,programing,industrial controls, OSHA30to include intrinsically attached to my experienceCFR Title 29 part 1910.147 and NFPA 70 continuously Training, Development and Implementing.I also possess extensive knowledge of general industry and project management. I have knowledge of motor drives, control systems, AutoCAD, and expert levelon mechanical, hydraulic, pneumatic, and electricalsystems. My experience and work history has help createdgood time management. Possess greatcustomer service skills. I am a dedicated team player and able to lead when necessary to meet the goals of the organizationI have attachedmy resume for your review, it will describe myskills and experience. And a capable individual, I will like the opportunity to contribute to your organization with my knowledge, team work abilities, and extensive understanding ofthe industrial field. If there are any questions on any regard or please don?t hesitate to call me at (361)726-1689. I welcome the opportunity to demonstratemy abilitiesand contribute to yourteam. Whether as a remote employee or a contractor.Sincerely,Alvaro Ramiro2400 Kilgore RdBaytown TX 77520 (+1 361 7261 689)alvaroramiro@yahoo.com
Alvaro Ramiro2400 Kilgore, Baytown TX 77520alvaroramiro@yahoo.com -(361) 726 1689To work with an organization that fully utilizes my life experience while promoting new challenges.WORK EXPERIENCEMaintenance TechnicianUTLX Manufacturing -Sheldon, TX -August 2016 to PresentBilingual Global Technical InstructorNational Oilwell Varco -Houston, TX -January 2014 to June 2015Teaching Electrical Controls, Electrical Maintenance and Mechanical courses to internal and external customers in the commissioning and maintenance of oil field equipment with tangibles results. On site and classroom, using power point presentations and experience. Development of customer specific classes and competencies, assisting sales and field service technicians while enhancing and adapting to market trends travel to customer sites in the Country and abroad working with different cultures and languagesElectro Mechanical TechnicianIndustrial Fabricators -November 2009 to December 2014Maintenance of production equipment, as Overhead cranes, VFD's DC/AC drives, CNC, Motor starters welders, press brakes, Hydraulics. Pneumatics and mechanical including all fabricating equipmentMaintenance ElectricianCITGO -March 2005 to August 2007Chemical plant, trouble shooting controls, lighting and substations, repair electrical equipment, or preventive maintenance, conduit and wire runs, pumps, compressors, Motor Starters,ACs /DC Drives, MOV, VFD, PLC, Switchgears, generators, instruments, plant safety procedures.General ContractorRamiro Consulting _ Corpus Christi TX August 1999 to Jan 2005
Building of new homes and remodeling, managed crews of up to 25 labor hands and subcontractors, Project manager bookkeeping and payroll training and supervising crews, Rewiring and service callsTechnical InstructorRichard J. Daley College/ Chicago Commons ?Assisted on development of a new program of manufacturing technology ?Trained students on Computer Drafting, math shop, Computer Numerical Controls in Classroom, lab, and on the field production facilities.?Field Training and skills development for employees and customers, competency based Training?Archive Training,records and documentation for all trainees and classes?Identify and arrange the learning resources/documents (such as training material, Operating manuals, Maintenance manuals, Training manuals, Technical Drawings Critical Competency Checklists, Task Based Assessment Lists, Operations & Maintenance procedures and Standing instructions etc.) that are required for the traineesTechnical InstructorChicago Commons -January 1989 to January 1995?Developed and presented multilevel classroom courses on Manufacturing Technology to full time students as well as employees and end users with varying levels of knowledge, skills, and abilities.?Assist in development of training materials, technical/troubleshooting manuals, and user guides.?Taught industrial controls programing and mechanical instrumentation.?Created course guides for specific business sector.?Prepared syllabus, daily classroom materials, and student references manuals for field on the job trainees, to continuously improve their skills.EDUCATIONIndustrial EngineeringTexas A & M KingsvilleELECTRICIAN (10+ years)CERTIFICATIONS/LICENSES
Top Drive, Draw-works, Amphion, Hydraulics, OH CranesIndustrial Controls, ABB, SIEMENS, ALLEN BRADLEY, TDLR Journeyman ElectricianADDITIONAL INFORMATIONOther Skills Bilingual Spanish/Englishand Microsoft Office Proficient |
|---|
| Instructor Resume: |
Alvaro Ramiro_Resume (1).pdf |
| Instructor First Name: | Duane |
|---|
| Instructor Last Name: | Swanson |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached bio |
|---|
| Instructor Resume: |
Duane Swanson's Bio.pdf |
| Instructor First Name: | Dan |
|---|
| Instructor Last Name: | Wheeler |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
Dan Wheeler Bio.docx |
| Instructor First Name: | Roger |
|---|
| Instructor Last Name: | Zieg |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached |
|---|
| Instructor Resume: |
Roger_Zieg_bio.pdf |
| Instructor First Name: | Randy |
|---|
| Instructor Last Name: | Barnett |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached |
|---|
| Instructor Resume: |
Barnett_Randy.pdf |
| Instructor First Name: | Mike |
|---|
| Instructor Last Name: | Bonnell |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Bonnell_Michael Bio.pdf |
| Instructor First Name: | Orson |
|---|
| Instructor Last Name: | Christiansen |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | ORSON CHRISTIANSEN Professional Experience: Quality Assurance Test Engineer, Hercules Inc.; Electrical Engineer, Facilities, Hercules Inc.; Senior Facilities Engineer, Electrical, Hercules Inc.; Instructor, Technology Dept., University of Utah;District Manager, Bussmann Fuse Co.;Senior Sales Engineer, Cooper Bussmann Inc.; Member, Executive Committee, Northwestern Section;International Association of Electrical Inspectors Instructor, Electrician Licensing Renewal, “Overcurrent Protection and the National Electrical Code”, states of Idaho, Montana and Utah National Technology Transfer – Instructor since 2005 Education and Training: BSEE, University of Utah, Salt Lake City, UT 1961 Licensed Professional Engr, Electrical, UT -Certified Instructor, Electrician CEU Courses, Code-Related, State Of Montana -Certified Instructor, Electrician CEU Courses, Industry-Related, State of Idaho -Certified Instructor, Electrician CEU Courses, Code-Related, State of Utah |
|---|
| Instructor Resume: |
O. Christiansen resume.doc |
| Instructor First Name: | Larry |
|---|
| Instructor Last Name: | Covert |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
LarryCovert.pdf |
| Instructor First Name: | Bill |
|---|
| Instructor Last Name: | Gantic |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Gantic_Bio.pdf |
| Instructor First Name: | Daniel |
|---|
| Instructor Last Name: | Holmberg |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
DanielHolmberg.pdf |
| Instructor First Name: | Ron |
|---|
| Instructor Last Name: | Hughes |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Hughes_Ron.pdf |
| Instructor First Name: | Redwood |
|---|
| Instructor Last Name: | Kardon |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached. |
|---|
| Instructor Resume: |
36668_Redwood_Kardon_47819_201710051231_Resume (002).pdf |
| Instructor First Name: | John |
|---|
| Instructor Last Name: | Kempa |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
Kempa_John.pdf |
| Instructor First Name: | Terry |
|---|
| Instructor Last Name: | Konell |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Konell_Terrance Bio.pdf |
| Instructor First Name: | Terry |
|---|
| Instructor Last Name: | Ledbetter |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Ledbetter_Terry Bio.pdf |
| Instructor First Name: | Gordon |
|---|
| Instructor Last Name: | Little |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | Gordon Little
14313 Knoll Park DR E
Bonney Lake WA, 98391
Electrical License: ME01 Littlg*976JG
4/29/1987-10/23/1990 Electrician Maintenance Installer
Work with engineered drawings to install electrical components, conduit systems, and wiring, in
accordance with NFPA70 National Electric Codes
10/24/1990-7/04/1997 Electrician Maintenance
Military Flight Center, Maintain Ground Support Equipment, 400hz Generators, light carts,
explosion proof cords.
Maintain and service conventional machine tools, and process equipment.
Electronics Maintenance Technician 03/13/1997-04/29/2017
Machine Tool Rebuild ? Work Exclusively with NFPA79 Electrical Standard for Industrial
Machines. Rebuild, upgrade, modify, and test and trouble shoot problems.
UL508A Panel Shop, Fabricated Industrial Control Panels for Machine Tools Also Any Control
Panel That Was Needed for Any Boeing Location. In accordance with the standards of UL508A.
NFPA70 National Electric Codes, Installed Electrical Systems, Conduit Runs and Wiring in
Accordance with The National Electric Codes.
Work with Electronics Maintenance Technician Apprentices to Teach NFPA79 Standards, Build
Industrial Control Panels and Apply the NFPA70 National Electric Code.
Technician Lead in Moonshine Shop, Fabricating Right Size Pieces of Equipment, Completing
All Wiring Needed in Accordance with All Applicable Codes.
Electronic Technician Precision Machine Tool Maintenance, Completed Electrical Work on
Precision Machine Tools. Install, service, maintain, upgrade, and modify machine tools. Testing
and Trouble Shooting.
Work with Management, Engineering, equipment manufacturers, vendors. |
|---|
| Instructor Resume: |
Gordon Little_Resume (1).pdf |
| Instructor First Name: | Mike |
|---|
| Instructor Last Name: | Miers |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
Mike Miers Resume.tif |
| Instructor First Name: | Vernon |
|---|
| Instructor Last Name: | Miller |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Miller_Vernon Bio.pdf |
| Instructor First Name: | Steve |
|---|
| Instructor Last Name: | Pfister |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | Please see attached resume |
|---|
| Instructor Resume: |
Pfister_Steve_ Resume_NTT Update.pdf |
| Instructor First Name: | Alan |
|---|
| Instructor Last Name: | Pike |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached |
|---|
| Instructor Resume: |
Pike_Alan Bio.pdf |
| Instructor First Name: | Alvaro |
|---|
| Instructor Last Name: | Ramiro |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | January 11, 2019NTT HRRemoteInstructor Job Opening.I offermore than 10years of industrial maintenanceexperience, andtwoyears of Industrial Technology Education, tenyears of Manufacturing and Technology Instructor, and two years as Global Technical Trainer.I possess extensive familiarityin electricalprojects,programing,industrial controls, OSHA30to include intrinsically attached to my experienceCFR Title 29 part 1910.147 and NFPA 70 continuously Training, Development and Implementing.I also possess extensive knowledge of general industry and project management. I have knowledge of motor drives, control systems, AutoCAD, and expert levelon mechanical, hydraulic, pneumatic, and electricalsystems. My experience and work history has help createdgood time management. Possess greatcustomer service skills. I am a dedicated team player and able to lead when necessary to meet the goals of the organizationI have attachedmy resume for your review, it will describe myskills and experience. And a capable individual, I will like the opportunity to contribute to your organization with my knowledge, team work abilities, and extensive understanding ofthe industrial field. If there are any questions on any regard or please don?t hesitate to call me at (361)726-1689. I welcome the opportunity to demonstratemy abilitiesand contribute to yourteam. Whether as a remote employee or a contractor.Sincerely,Alvaro Ramiro2400 Kilgore RdBaytown TX 77520 (+1 361 7261 689)alvaroramiro@yahoo.com
Alvaro Ramiro2400 Kilgore, Baytown TX 77520alvaroramiro@yahoo.com -(361) 726 1689To work with an organization that fully utilizes my life experience while promoting new challenges.WORK EXPERIENCEMaintenance TechnicianUTLX Manufacturing -Sheldon, TX -August 2016 to PresentBilingual Global Technical InstructorNational Oilwell Varco -Houston, TX -January 2014 to June 2015Teaching Electrical Controls, Electrical Maintenance and Mechanical courses to internal and external customers in the commissioning and maintenance of oil field equipment with tangibles results. On site and classroom, using power point presentations and experience. Development of customer specific classes and competencies, assisting sales and field service technicians while enhancing and adapting to market trends travel to customer sites in the Country and abroad working with different cultures and languagesElectro Mechanical TechnicianIndustrial Fabricators -November 2009 to December 2014Maintenance of production equipment, as Overhead cranes, VFD's DC/AC drives, CNC, Motor starters welders, press brakes, Hydraulics. Pneumatics and mechanical including all fabricating equipmentMaintenance ElectricianCITGO -March 2005 to August 2007Chemical plant, trouble shooting controls, lighting and substations, repair electrical equipment, or preventive maintenance, conduit and wire runs, pumps, compressors, Motor Starters,ACs /DC Drives, MOV, VFD, PLC, Switchgears, generators, instruments, plant safety procedures.General ContractorRamiro Consulting _ Corpus Christi TX August 1999 to Jan 2005
Building of new homes and remodeling, managed crews of up to 25 labor hands and subcontractors, Project manager bookkeeping and payroll training and supervising crews, Rewiring and service callsTechnical InstructorRichard J. Daley College/ Chicago Commons ?Assisted on development of a new program of manufacturing technology ?Trained students on Computer Drafting, math shop, Computer Numerical Controls in Classroom, lab, and on the field production facilities.?Field Training and skills development for employees and customers, competency based Training?Archive Training,records and documentation for all trainees and classes?Identify and arrange the learning resources/documents (such as training material, Operating manuals, Maintenance manuals, Training manuals, Technical Drawings Critical Competency Checklists, Task Based Assessment Lists, Operations & Maintenance procedures and Standing instructions etc.) that are required for the traineesTechnical InstructorChicago Commons -January 1989 to January 1995?Developed and presented multilevel classroom courses on Manufacturing Technology to full time students as well as employees and end users with varying levels of knowledge, skills, and abilities.?Assist in development of training materials, technical/troubleshooting manuals, and user guides.?Taught industrial controls programing and mechanical instrumentation.?Created course guides for specific business sector.?Prepared syllabus, daily classroom materials, and student references manuals for field on the job trainees, to continuously improve their skills.EDUCATIONIndustrial EngineeringTexas A & M KingsvilleELECTRICIAN (10+ years)CERTIFICATIONS/LICENSES
Top Drive, Draw-works, Amphion, Hydraulics, OH CranesIndustrial Controls, ABB, SIEMENS, ALLEN BRADLEY, TDLR Journeyman ElectricianADDITIONAL INFORMATIONOther Skills Bilingual Spanish/Englishand Microsoft Office Proficient |
|---|
| Instructor Resume: |
Alvaro Ramiro_Resume (1).pdf |
| Instructor First Name: | Paul |
|---|
| Instructor Last Name: | Rosenberg |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
Rosenberg_Paul.pdf |
| Instructor First Name: | Dan |
|---|
| Instructor Last Name: | Wheeler |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
Dan Wheeler Bio.docx |
| Instructor First Name: | Roger |
|---|
| Instructor Last Name: | Zieg |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached |
|---|
| Instructor Resume: |
Roger_Zieg_bio.pdf |
| Instructor First Name: | Mike |
|---|
| Instructor Last Name: | Bonnell |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Bonnell_Michael Bio.pdf |
| Instructor First Name: | Orson |
|---|
| Instructor Last Name: | Christiansen |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | ORSON CHRISTIANSEN Professional Experience: Quality Assurance Test Engineer, Hercules Inc.; Electrical Engineer, Facilities, Hercules Inc.; Senior Facilities Engineer, Electrical, Hercules Inc.; Instructor, Technology Dept., University of Utah;District Manager, Bussmann Fuse Co.;Senior Sales Engineer, Cooper Bussmann Inc.; Member, Executive Committee, Northwestern Section;International Association of Electrical Inspectors Instructor, Electrician Licensing Renewal, “Overcurrent Protection and the National Electrical Code”, states of Idaho, Montana and Utah National Technology Transfer – Instructor since 2005 Education and Training: BSEE, University of Utah, Salt Lake City, UT 1961 Licensed Professional Engr, Electrical, UT -Certified Instructor, Electrician CEU Courses, Code-Related, State Of Montana -Certified Instructor, Electrician CEU Courses, Industry-Related, State of Idaho -Certified Instructor, Electrician CEU Courses, Code-Related, State of Utah |
|---|
| Instructor Resume: |
O. Christiansen resume.doc |
| Instructor First Name: | Larry |
|---|
| Instructor Last Name: | Covert |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
LarryCovert.pdf |
| Instructor First Name: | Jim |
|---|
| Instructor Last Name: | Fleming |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Fleming_Jim Bio.pdf |
| Instructor First Name: | Bill |
|---|
| Instructor Last Name: | Gantic |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Gantic_Bio.pdf |
| Instructor First Name: | Daniel |
|---|
| Instructor Last Name: | Holmberg |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
DanielHolmberg.pdf |
| Instructor First Name: | Terry |
|---|
| Instructor Last Name: | Konell |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Konell_Terrance Bio.pdf |
| Instructor First Name: | Terry |
|---|
| Instructor Last Name: | Ledbetter |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Ledbetter_Terry Bio.pdf |
| Instructor First Name: | Gordon |
|---|
| Instructor Last Name: | Little |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | Gordon Little
14313 Knoll Park DR E
Bonney Lake WA, 98391
Electrical License: ME01 Littlg*976JG
4/29/1987-10/23/1990 Electrician Maintenance Installer
Work with engineered drawings to install electrical components, conduit systems, and wiring, in
accordance with NFPA70 National Electric Codes
10/24/1990-7/04/1997 Electrician Maintenance
Military Flight Center, Maintain Ground Support Equipment, 400hz Generators, light carts,
explosion proof cords.
Maintain and service conventional machine tools, and process equipment.
Electronics Maintenance Technician 03/13/1997-04/29/2017
Machine Tool Rebuild ? Work Exclusively with NFPA79 Electrical Standard for Industrial
Machines. Rebuild, upgrade, modify, and test and trouble shoot problems.
UL508A Panel Shop, Fabricated Industrial Control Panels for Machine Tools Also Any Control
Panel That Was Needed for Any Boeing Location. In accordance with the standards of UL508A.
NFPA70 National Electric Codes, Installed Electrical Systems, Conduit Runs and Wiring in
Accordance with The National Electric Codes.
Work with Electronics Maintenance Technician Apprentices to Teach NFPA79 Standards, Build
Industrial Control Panels and Apply the NFPA70 National Electric Code.
Technician Lead in Moonshine Shop, Fabricating Right Size Pieces of Equipment, Completing
All Wiring Needed in Accordance with All Applicable Codes.
Electronic Technician Precision Machine Tool Maintenance, Completed Electrical Work on
Precision Machine Tools. Install, service, maintain, upgrade, and modify machine tools. Testing
and Trouble Shooting.
Work with Management, Engineering, equipment manufacturers, vendors. |
|---|
| Instructor Resume: |
Gordon Little_Resume (1).pdf |
| Instructor First Name: | Mike |
|---|
| Instructor Last Name: | Miers |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
Mike Miers Resume.tif |
| Instructor First Name: | Vernon |
|---|
| Instructor Last Name: | Miller |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | see attached |
|---|
| Instructor Resume: |
Miller_Vernon Bio.pdf |
| Instructor First Name: | Steve |
|---|
| Instructor Last Name: | Pfister |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | Please see attached resume |
|---|
| Instructor Resume: |
Pfister_Steve_ Resume_NTT Update.pdf |
| Instructor First Name: | Alvaro |
|---|
| Instructor Last Name: | Ramiro |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | January 11, 2019NTT HRRemoteInstructor Job Opening.I offermore than 10years of industrial maintenanceexperience, andtwoyears of Industrial Technology Education, tenyears of Manufacturing and Technology Instructor, and two years as Global Technical Trainer.I possess extensive familiarityin electricalprojects,programing,industrial controls, OSHA30to include intrinsically attached to my experienceCFR Title 29 part 1910.147 and NFPA 70 continuously Training, Development and Implementing.I also possess extensive knowledge of general industry and project management. I have knowledge of motor drives, control systems, AutoCAD, and expert levelon mechanical, hydraulic, pneumatic, and electricalsystems. My experience and work history has help createdgood time management. Possess greatcustomer service skills. I am a dedicated team player and able to lead when necessary to meet the goals of the organizationI have attachedmy resume for your review, it will describe myskills and experience. And a capable individual, I will like the opportunity to contribute to your organization with my knowledge, team work abilities, and extensive understanding ofthe industrial field. If there are any questions on any regard or please don?t hesitate to call me at (361)726-1689. I welcome the opportunity to demonstratemy abilitiesand contribute to yourteam. Whether as a remote employee or a contractor.Sincerely,Alvaro Ramiro2400 Kilgore RdBaytown TX 77520 (+1 361 7261 689)alvaroramiro@yahoo.com
Alvaro Ramiro2400 Kilgore, Baytown TX 77520alvaroramiro@yahoo.com -(361) 726 1689To work with an organization that fully utilizes my life experience while promoting new challenges.WORK EXPERIENCEMaintenance TechnicianUTLX Manufacturing -Sheldon, TX -August 2016 to PresentBilingual Global Technical InstructorNational Oilwell Varco -Houston, TX -January 2014 to June 2015Teaching Electrical Controls, Electrical Maintenance and Mechanical courses to internal and external customers in the commissioning and maintenance of oil field equipment with tangibles results. On site and classroom, using power point presentations and experience. Development of customer specific classes and competencies, assisting sales and field service technicians while enhancing and adapting to market trends travel to customer sites in the Country and abroad working with different cultures and languagesElectro Mechanical TechnicianIndustrial Fabricators -November 2009 to December 2014Maintenance of production equipment, as Overhead cranes, VFD's DC/AC drives, CNC, Motor starters welders, press brakes, Hydraulics. Pneumatics and mechanical including all fabricating equipmentMaintenance ElectricianCITGO -March 2005 to August 2007Chemical plant, trouble shooting controls, lighting and substations, repair electrical equipment, or preventive maintenance, conduit and wire runs, pumps, compressors, Motor Starters,ACs /DC Drives, MOV, VFD, PLC, Switchgears, generators, instruments, plant safety procedures.General ContractorRamiro Consulting _ Corpus Christi TX August 1999 to Jan 2005
Building of new homes and remodeling, managed crews of up to 25 labor hands and subcontractors, Project manager bookkeeping and payroll training and supervising crews, Rewiring and service callsTechnical InstructorRichard J. Daley College/ Chicago Commons ?Assisted on development of a new program of manufacturing technology ?Trained students on Computer Drafting, math shop, Computer Numerical Controls in Classroom, lab, and on the field production facilities.?Field Training and skills development for employees and customers, competency based Training?Archive Training,records and documentation for all trainees and classes?Identify and arrange the learning resources/documents (such as training material, Operating manuals, Maintenance manuals, Training manuals, Technical Drawings Critical Competency Checklists, Task Based Assessment Lists, Operations & Maintenance procedures and Standing instructions etc.) that are required for the traineesTechnical InstructorChicago Commons -January 1989 to January 1995?Developed and presented multilevel classroom courses on Manufacturing Technology to full time students as well as employees and end users with varying levels of knowledge, skills, and abilities.?Assist in development of training materials, technical/troubleshooting manuals, and user guides.?Taught industrial controls programing and mechanical instrumentation.?Created course guides for specific business sector.?Prepared syllabus, daily classroom materials, and student references manuals for field on the job trainees, to continuously improve their skills.EDUCATIONIndustrial EngineeringTexas A & M KingsvilleELECTRICIAN (10+ years)CERTIFICATIONS/LICENSES
Top Drive, Draw-works, Amphion, Hydraulics, OH CranesIndustrial Controls, ABB, SIEMENS, ALLEN BRADLEY, TDLR Journeyman ElectricianADDITIONAL INFORMATIONOther Skills Bilingual Spanish/Englishand Microsoft Office Proficient |
|---|
| Instructor Resume: |
Alvaro Ramiro_Resume (1).pdf |
| Instructor First Name: | Wayne |
|---|
| Instructor Last Name: | Rivers |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached resume |
|---|
| Instructor Resume: |
Rivers_Wayne.pdf |
| Instructor First Name: | Paul |
|---|
| Instructor Last Name: | Rosenberg |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
Rosenberg_Paul.pdf |
| Instructor First Name: | Dan |
|---|
| Instructor Last Name: | Wheeler |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | |
|---|
| Instructor Resume: |
Dan Wheeler Bio.docx |
| Instructor First Name: | Roger |
|---|
| Instructor Last Name: | Zieg |
|---|
| Instructor License #: | |
|---|
| Instructor Resume: | See attached |
|---|
| Instructor Resume: |
Roger_Zieg_bio.pdf |